This bundle provides everything you need to cleanly install your Switch-Pro system in your Toyota. Choose from three options for powering the Fuse Block and Switch-Pro with USA-made cables and marine-grade fuses or circuit breakers. Tie-down option available for aftermarket batteries. Low-profile mini fuse taps allow for proper operation of the Switch-Pro system.

This Accessory Bundle doesNOT include the Switch-Pros 9100OR the Switch-Pros PowerTray Mount. Those are separate products. This bundle is for everything else you’ll need to cleanly install this system in yourToyota.

You have three options for providing power to the Fuse Block and Switch-Pros:

Our Power and ground cables are all made in-house using USA made welding wire, tin-plated copper battery lugs,wrapped in braided protective sheathing and sealed with 3M marine-grade heat shrink.

1. Dual MRBF Option:This option replaces the Switch-Pros supplied power cable so all the cables for the whole system match. The replacement cable is also slightly longer which allows it to be routed nicely down and around the factory fuse box. A Dual Marine Rated Battery Fuse (MRBF) holder is used for circuit protection.

This option includes the following:

• Dual MRBFterminal fuse holder
• 125A Marine Rated Battery Fuse (Circuit Protection for Switch-Pros)
• 100A Marine Rated Battery Fuse (Circuit Protection for Fuse Block)
• 2 Premium USA Made Power Cables
• 26″ Length 4 GaugePower Cable (125A MRBFtoSwitch-Pros)
• 24″ Length 4 GaugePower Cable (100A MRBFto Fuse Block)
• 2 Premium USA MadeGroundCables
• 3 Length 4 GaugeGround Cable (Fuse Block to Busbar)
• 16″ Length 4 GaugeGroundCable (Busbar to Fender Ground)
• Blue Sea5025 6 Circuit Fuse Block
• Blue Sea 230010 Screw Common Busbar
• Blue Sea 8 Circuit Barrier Terminal Block
• MolexPermaSeal Ring Terminals (5 large, 5 small)

Dual MRBF Install with Runnin4Tacos!

2. Dual CBOption:This optionutilizes2 circuit breakers as opposed to the terminal mount MRBF’s. Circuit breakers provide the same protection as the MRBF’s, with the added benefit of being resettable if the current exceeds the max rating.These circuit breakers also have a manual tripbuttonto cut power to the system for when youre working on it and wiring up new accessories. Note: The circuit breakerscan bemounted to the top of your factory fuse block cover with 3M double sided VHB tape if you don’t want to drill any holes.

CLICK HERE to see more pics of the Dual CB setup.

This option includes the following:

• 100A surface mount CB
• 120A surface mount CB
• 4 Premium USA Made Power Cables
• 21″ Length 4 GaugePower Cable ( Battery to 100A CB)
• 21″ Length 4 GaugePower Cable (Battery to 120A CB)
• 42″ Length 4 GaugePower Cable (100A CB to Fuse Block)
• 30″ Length 4 GaugePower Cable (120A CB to Switch-Pros)
• 2 Premium USA MadeGround Cables
• 3 Length 4 GaugeGround Cable (Fuse Block to Busbar)
• 16″ Length 4 GaugeGroundCable (Busbar to Fender Ground)
• Blue Sea5025 6 Circuit Fuse Block
• Blue Sea 230010 Screw Common Busbar
• Blue Sea 8 Circuit Barrier Terminal Block
• MolexPermaSeal Ring Terminals (5 large, 5 small)

3. Dual CB w/ Battery TiedownOption:This option includes our CNC machined aluminum tie-downto mount the Circuit breaker to instead of the having to mount them on top of the factory fuse cover. Does not work with OEM lead-acid batteries due to the vents on top of the battery. Requires aftermarket battery with a flat top.

This option includes the following:

• CNC Machined Aluminum Tie-down
• 100A surface mount CB
• 120A surface mount CB
• 4 Premium USA Made Power Cables
• 21″ Length 4 GaugePower Cable ( Battery to 100A CB)
• 21″ Length 4 GaugePower Cable (Battery to 120A CB)
• 42″ Length 4 GaugePower Cable (100A CB to Fuse Block)
• 30″ Length 4 GaugePower Cable (120A CB to Switch-Pros)
• 2 Premium USA MadeGround Cables
• 3 Length 4 GaugeGround Cable(Fuse Block to Busbar)
• 16″ Length 4 GaugeGroundCable(Busbar to Fender Ground)
• Blue Sea5025 6 Circuit Fuse Block
• Blue Sea 230010 Screw Common Busbar
• Blue Sea 8 Circuit Barrier Terminal Block
• MolexPermaSeal Ring Terminals (5 large, 5 small)

Note: Your stock battery tie down may have welded J-Hooks or you may need longer J-Hooks for taller batteries. Click here for longer J-Hooks.

Tie-Down does NOT work with factory batteries or vented lead acid batteries.

Low-ProfileMini fuse taps:Our Toyota’s use Low-Profile Mini fuses which are less commonhere. In order for the Switch-Pros to operate, it needs and ignition sense; AKA it needs to knowif the vehicle isrunning or not. Note: Switch-Pros does supply (1) Mini fuse tap, which is not the same as fuses our Toyota’s use. The regular mini tap will work, but due toits height thefactory fuse box cover located behind the dash might need modification tosnap back on. The other tapsareoptional and used as a light sense, todim the switch panel at night, and a trigger tap.