BDS Suspension 4.5″ lift kit for the 2016-17 Toyota Tundra 4WD

This complete 4.5″ IFS w/ strut mount lift kit system incorperates the same features, technology, and performanced based design as our popular 07-15 system. This system is not only built for daily driving, but will handle about any off road excursion you can think of. The heavy duty main crossmembers are locked together by a full belly pan that offers superior off road protection.

Included with this IFS lift kit are CNC machined steering knuckles which ensure a clean and simple install that is made easier by the lower strut mounts that don’t require you to disassemble the strut. Rear NX series shock absorbers are included with 9500 series gas shocks available as an upgrade for this 4.5″ Toyota Tundra lift kit.

Check out theinstall articlepublished in Four Wheeler magazine.

• Tire & Wheel Combinations
• 35 x 12.50 w/18×9 and 5-1/2 back spacing
• 35 x 12.50 w/20×9 and 5-1/2 – 6.25″ back spacing

*Trimming may be required*

• Est. Installation:8 hours
• Difficulty Level (easy 1 – 5 complicated):3
• View completeVehicle Fitment Informationhere

Important Kit Notes

• 1. Requires frame bracket modification and welding.
• 2. No strut dissassembly required.
• 3. Stock 18″ wheels can not be installed. factory 20″ wheels with more than 6.25″ backspacing can not be installed.
• 4. Models with two piece rear drive line would require rear drive shaft modification.
• 5. Models equipped with 6 piston calipers require modification.
• 6. Will NOT work on TRD Pro (Bilstein Piggback Strut) models.