This Snorkel Upgrade is the Sy-Klone Series 9001 Air Precleaner for Tacoma (1995-2023) and features patented technology that uses the centrifugal force generated by the rotor inside of its dome to separate particles out of the air before going into your snorkel. The pre-cleaner uses the airflow from your engine intake to spin a rotor which creates a cyclone style effect inside the dome pushing large particles to the inner wall of the dome where they are ejected. This makes the worries of rain, snow or lots of dusty on a dry day from coming into your snorkel and clogging your filter go away! With this pre-cleaner, you also dont need to worry about adjusting your snorkel head or dumping out a pre-cleaner that catchesdebris.

Sy-Klone Series 9001 Snorkel Head Air Precleaner for Tacoma has a CFM efficiency range of 100 CFM to 275 CFM. Designed for Gas Engines up to 4.8 liters displacement size.

Features

• The ProductSeries 9000created by Sy-Klone
• Patented US-made technology
• Used across all major heavy equipment manufacturers for decades
• Standard issue on the military Humvee replacement the JLTV

What is my snorkel inlet size? Check out our breakdown of what fits what. Snorkel inlet sizes can change depending on the make of your vehicle, model year, and brand of the snorkel.

• Airflow Snorkel: 3.5-inch inlet
• ARB Safari Snorkel: 4-inch inlet
• Dobinsons: 3.35-inch inlet
• eBay:Generally 3.5-inch inlet

The diameters of snorkel inlets normally range from 3 to 4 inches.
Fits most if not all snorkel kits on the market including, AEV, RuggedRidge, Bravo, Safari, and more.

Not all engines are the same and you want to make sure your Precleaner fits your engine likeCinderella’s slipper, perfect… or should we say your Cylinderella.

Installation

• Remove the current head from your snorkel.
• Measure the inlet after the snorkel head is removed (most cases your inlet will be 2 inches, 3, inches or 4 inches).
• Put your old snorkel head back on for the time being.
• Order your pre-cleaner snorkel upgrade.
• Once you have your pre-cleaner remove your old snorkel head.
• Insert rubber adapter.
• Place pre-cleaner on the inlet of your snorkel.
• Tighten down the metal clamp.
• Go out on your next off-road adventure knowing you dont need to worry about rain, heavy dust, snow, and other debris you might find yourself in.