BDS Suspension 4″ Lift Kit for the 2009-2013 Dodge 2500 Powerwagon.

This 4″ lift kit includes frontPro-Ride Coil Springsand heavy duty, greasable upper and lower control arms. The lower arms are longer than stock to rotate the axle for proper alignment. A relocation bracket is used to flatten out the angle of the upper control arm to maintain your factory handling characteristics. All four control arms are greasable for long term performance.

A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket properly centers the axle under the vehicle. Extended bump stops, brake line relocation brackets and Powerwagon specific sway bar are also included.

• Tire & Wheel Combinations
• 36″ x 12.50″ w/17 x 9 and 5″ back spacing

*Trimming may be required*

• Est. Installation:8 hours
• Difficulty Level (easy 1 – 5 complicated):3
• View completeVehicle Fitment Informationhere

Important Kit Notes

• 1. These vehicle were manufactured with two different diameter rear axles. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2″ or 4″ in diameter.
• 2. May require front exhaust modification to clear front driveshaft at full droop.